News from GN company this week: Recently, 1 set of Waste Pit Cleaning GN Solids Vacuum Pump has been manufactured and ready to start serving an  Oilfield Service company for drilling waste handling project.

Oil drilling service companies often use solid vacuum pumps for the following purpose:

Drilling cuttings transportation

Cleaning mud tank

Cleaning platform

Environmental protection sludge pit cleaning

To make sure this set of Vacuum Pump will provide a reliable performance and all the parts and components of the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, and every step of the production. And a series of strict trial and inspection of the equipment was made before the packing and shipment.

If you need any support or advice about the operation and maintenance of GN’s Equipment such as Sludge Vacuum Pump and other equipment for material transportation or separation, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of 1000HP Drilling Rig Solids Control System have been manufactured and are ready to start serving for a Middle East project, the system includes: Drilling fluid shale shaker, Mud tanks, Mud cleaner, Solids control Decanter centrifuge, Mixing hoppers , etc.

To make sure this set of Drilling Rig Solids Control Equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like shale shaker, mud cleaner, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 5 complete set of Drilling Waste Treatment Equipment have been manufactured and are ready to start serving for a 2000HP drilling rig in Nigeria. the system includes 4 sets of vibrating screen GNZS594F, 1 set of mud cleaner GNZJ594F-3S16N, 2 sets of Decanter centrifuge GNLW454ET-VFD.

In three months, GN has completed the export of 5 sets of drilling oil-based mud complete sets of equipment projects to Nigeria. The customer arranged for a third-party inspection DNV to conduct factory testing and equipment acceptance of the product. The 5 sets of drilling oil-based mud non-falling equipment have passed the third-party acceptance of the customer.

The 5 sets of drilling rig mud non-falling equipment mainly include the following equipment:

1. 5 sets of cuttings dryer and skid-mounted lifting bracket

The core equipment for drying and processing of oil-based cuttings, its model is GNCD930G. It can meet the requirements of large-scale 2000HP (80 drilling rigs) oil-based cuttings without falling to the ground.

2. 10 sets of Decanter centrifuges and skid-mounted brackets

Among them, 5 sets of Decanter centrifuges are used for the customer’s drilling rig solid control mud treatment, and the other 5 sets of Decanter centrifuges are used for the separation of fine particles of drilling fluid discharged from the supporting dryer, so as to meet the reuse of oil-based mud that does not fall to the ground. This time, the customer purchased GN’s best-selling model: GNLW363D, including 5 power frequency centrifuges and 5 variable frequency centrifuges.

3.5 sets of auxiliary equipment for drilling oil-based mud without landing

Auxiliary equipment includes 40 GNSC series screw conveyors, some of which are used to feed the dryer, and some of the screw conveyors are used to convey the slag material to the centrifuge and the dryer. The screw conveyor is also equipped with a mechanical speed regulation function and an electric control start control cabinet. In addition, the auxiliary equipment purchased by the customer also includes 15 screw pumps, of which 5 are used to flush the cuttings dryer and 10 are used to feed the decanter centrifuge.

Party A of the Nigeria project is a large local oil development company with its own oil field and drilling team, as well as a mud service company. Since it started to cooperate with GN Solids Control in 2012, it has cooperated with GN Solids every year. The purchase of 5 sets of 2000HP large-scale drilling rigs of solids control centrifuges and oil-based mud non-drop processing equipment is a continuous trust and recognition of GN’s products and services. GN will also create value for customers with high-quality products, reasonable prices, and timely and professional services.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of Drilling Mud Desander and Desilter Assembly have been manufactured and ready to start serving a new project for an offshore drilling company.

To make sure the Drilling Mud Desander and Desilter will provide a reliable performance and every parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection in each step.

If you need any support about the operation and maintenance of Drilling Mud Desander and Desilter, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, please check the following products of GN company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 set of New Type Dewatering Vibrating Screen has been manufactured and are ready to start serving for a Mineral Treatment project. The model number is GNLMZ1836.

To make sure this set of dewatering Vibrating Screen system will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like Vibrating Screen, Mud tank, Mixer, Centrifugal pump, mud cleaner, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump