News from GN company this week: Recently, a series of Solids Control equipment have been manufactured and are ready to start serving for an Overseas Mud Company, the system includes the following modules：

Vertical Cuttings Dryer module: GNCD930G, container, Screw Conveyor, and flushing pump, lifting device, transfer tank, etc

Oilfield Decanter centrifuge: GNLW363D-VFD, container, liquid feed pump, and Screw Conveyor

Advantages of the container Vertical cuttings dryer system: It can meet the requirements of fast installation and transportation, and can also meet the requirements of low temperature areas in winter.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

To make sure these equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like Decanter centrifuge, Screw Conveyor, Feed Pump and Cuttings Dryer, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News for GN’s customers: GN Separation would like to Invite you to join the  27^th Mining World Russia Expo in April. WATER PHILIPPINES is Philippines’ Leading International Water Supply, Sanitation, Industrial Wastewater Treatment & Purification Event.

Official website of the exhibition: https://miningworld.ru/en/

Exhibition name: Mining World Russia

Exhibition date: April 25-27, 2023

Exhibition city: Moscow

Exhibition hall: Crocus Expo, Pavilion 1, halls 2, 3

Exhibition equipment:

1. Stack Vibrating Screen-Fine Sizer

2. Modular splicing polyurethane screen plate, polyurethane flexible screen

Mining World Russia is Russia’s leading mining & mineral extraction machinery, equipment and technology event. Mining World Russia is the an internationally-recognised trade show servicing the mining & mineral extraction industry. As a business platform, the exhibition connects equipment and technology manufacturers with buyers from Russian mining companies, mineral processors, and wholesalers interested in buying the latest mining solutions.

Hebei GN Separation Equipment Co., Ltd (GN Separation) is a wholly-owned subsidiary of GN Solid Control. The Mine Business Department of GN Separation is specially responsible for the development and manufacture of mining vibration screen equipment.

In addition to fine vibrating screen and medium vibrating screen, GN Separation has also developed large double-layer vibrating screen products. Including the following series:

1. Large double-layer linear vibrating screen

2. Large double-layer banana vibrating screen

3. Large double-layer flip flop vibrating screen

To make sure this series of mining vibrating screen will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

Please consult the website of GN Separation if you would like to know more about the above products.

Hebei GN Separation Equipment Co., Ltd (GN Separation) is a wholly-owned subsidiary of GN Solid Control. The Mine Business Department of GN Separation is specially responsible for the development and manufacture of mining vibration screen equipment.

In addition to fine vibrating screen and medium vibrating screen, GN Separation has also developed large double-layer vibrating screen products. Including the following series:

1. Large double-layer linear vibrating screen

2. Large double-layer banana vibrating screen

3. Large double-layer flip flow vibrating screen

Please consult the website of GN Separation if you would like to know more about the above products.

To make sure this series of mining vibrating screen will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department will pay enough attention to the material selection, material preparation, every step of production and the inspection for the equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like mining vibrating screen including Medium-sized linear dewatering screen and high-frequency liner screen, and Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 2 complete set of Triple Shale Shaker have been manufactured and ready to start serving a new project for an Drilling Company in Shandong Province.

1. Three drilling liquid Shale Shakers are installed on a base, which is convenient for customers to install and transport quickly.

2. The triple drilling liquid Shale Shaker contains a well -recording tank, which is convenient for customers to enter the slurry to connect the mud pipe.

3. Different from the negative pressure Shale Shaker that made by other manufacturers, GN‘s triple drilling liquid shale shakers can also be equipped with an additional negative pressure device, switching the ordinary triple shale shaker to a negative pressure shale shaker.

To make sure the Dual Motion Shale Shakers will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for the Dual Motion Shale Shakers in each step.

If you need any support about the operation and maintenance of the triple Shale Shaker, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 3 sets of Sludge dewatering screw press have been manufactured and ready to start serving for a Food Plant in Mexico .

To make sure these 3 sets of sludge dewatering screw press will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

If you need any support about the operation and maintenance of GN’s equipment like dewatering screw press and Chemical Dosing Unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Desander, Desilter and Degasser have been manufactured and ready to start serving a new project for a China Drilling Company.

Desander model：GNZJ752J-1S

Desilter model:  GNZJ752J-8N

Degasser model：GNZS270B

To make sure the Desander, Desilter and Degasser will provide a reliable performance and every parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection in each step.

If you need any support about the operation and maintenance of Desander, Desilter and Degasser, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, please check the following products of GN company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 4 Package s of Standard Mud Cleaning Units has been manufactured and are ready to start serving for an Australian Client.

Features:

1. Specification of mud purification device: GNMS-200D, processing volume: 200GPM, 4 sets.

2. The main equipment of the supporting facilities includes: GNZS753 Double deck Vibrating Screen, 4 -inch rotor assembly, for slurry pump, mud recovery tank.

3. Safety standards for the aisle guardrails and electrical equipment meet the Australian standards.

To make sure this set of Trenchless Mud Cleaning Units will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Trenchless Mud Cleaning Units, like Shale shaker, Double deck Vibrating Screen, mud cleaner, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Double Deck Linear Motion Shale Shakers have been manufactured and ready to start serving a new project for an European Client.

To make sure the Double Deck Linear Motion Shale Shakers will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for the Double Deck Linear Motion Shale Shaker in each step.

If you need any support about the operation and maintenance of the Double Deck Linear Motion Shale Shaker , please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Mining vibrating screen including Medium-sized linear dewatering screen and high-frequency liner screen, have been manufactured and ready to start serving for an Australian Aggregate Separation project.

To make sure this series of mining vibrating screen will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like mining vibrating screen including Medium-sized linear dewatering screen and high-frequency liner screen, and Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump