Monthly Archives: September 2021

Slurry Dewatering Vibrating Screen for Australia

News from GN company this week: Recently, 1 complete set of Slurry Dewatering Vibrating Screen have been manufactured and ready to start serving for a project of Slurry Dewatering in Australia.

GN Vibrating Screen changes the water tension on the surface of the material through the exciting force. The liquid/water passes through the screen, while the fine solid particles are blocked by the screen to form a filter layer and move forward under the effect of the vibration force. Vibrating Screen can apply polyurethane screen panel. The polyurethane screen panel is lined with steel bars, which is very strong and wear-resistant, has a long service life, and does not pollute treated materials. The polyurethane screen panel adopts an inverted triangle three-dimensional anti-blocking design, which can effectively prevent blockage.

To make sure the Vibrating Screen will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like Vibrating Screen, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

3 Phase Decanter Centrifuge for tank cleaning sludge treatment to Africa

News from GN company this week: Recently, 1 set of 3–Phase Decanter Centrifuge have been manufactured and ready to start serving for a project of tank cleaning sludge treatment in Africa.

To make sure the 3-Phase Decanter Centrifuge will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

GN 3-Phase Decanter Centrifuge is mainly designed for Solid-liquid-liquid three-phase separation of materials.With our over 10 years of experience in the separation industry, it is the most advanced type machine for 3 phase separation. It is designed for 24 hours continuous and smooth operation throughout the day. It is mainly composed of driving system, decanter bowl, screw conveyor inside the bowl, cover box, skid and VFD control panel.

If you need any support about the operation and maintenance of GN’s equipment like 3–Phase Decanter Centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Screw Conveyors and Screw Pumps for African Drilling Waste Management Company

Screw Conveyors and Screw Pumps for African Drilling Waste Management Company

News from GN company this week: Recently, a batch of Screw Conveyors and Screw Pumps have been manufactured and ready to start serving for an African Drilling Waste Management Company. Details of the products are described below:

1. 10 sets Variable Speed Screw Conveyor: 7x GNSC12B-12V and 3x GNSC12B-24V

2. 8 sets Variable Speed Screw Pump: 6x GNG30B-075V and 2x GNG10B-040V

3. 10 sets of Control Boxes for the electric control of the products.

To make sure the Screw Conveyors and Screw Pumps will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of the equipment like Screw Conveyors and Screw Pumps, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Decanter centrifuge used for the sewage treatment

Clean water is becoming more and more valuable raw materials, which is why the importance of urban sewage treatment continues to grow. The sludge from drinking water and sewage treatment must be separated as effectively as possible. At present, the industrial decanter centrifuge is considered as the latest technology of sludge dewatering and thickening, which has the characteristics of economy, energy saving and high efficiency.

GN company has more than 12 years of experience in sewage sludge treatment. We understand the special requirements of sewage treatment plant and water industry. The GN Brand has been in the industry since 2007. GN products have been exported to over 70 countries in the world. Over 70% of the products are made for international customers. GN have branch in Houston, USA and Moscow, Russia for support to our local customer. GN make different types of decanter centrifuge include Clarifying Centrifuge, Classifying Centrifuge, Thickening Centrifuge, Dewatering Centrifuge.

Sludge decanter centrifuge specially developed for the special requirements of sewage treatment plant

The main purpose of dewatering process is to minimize the volume of sludge. The reason is that every tenth increase of dry solid in sludge will reduce the cost of sludge removal. A higher dry solid content was obtained.

It not only eases the subsequent treatment process, but also improves the overall performance of the sewage treatment plant. GN company is used to compact the sludge, so that the dry solid content of the sludge is concentrated in a few percentage points.

GN decanter centrifuge can also be used for the best mud thickening of polymer based strong flocking agent. The polymer is largely removable, and the horizontal decanter centrifuge can achieve very good value.

The sewage sludge can be produced in drinking water treatment. The decanter centrifuge is used to reduce the transportation and landfill cost of sludge, increase the dry solid content, and reduce the amount of polymer required.