News from GN company this week: Recently, 1 set of Drilling Cuttings Drying Shaker has been manufactured and are ready to start serving for a Offshore Drilling Service Company.

This set of Drilling Cuttings Drying Equipment includes:

1. Anti-splash drilling cuttings drying shaker GNZS594F

2. Mud tank

3. Centrifugal pump

4. Mixers

2 To make sure this set of Drilling Cuttings Drying Shaker will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like Vibrating Screen, Mud tank, Mixer, Centrifugal pump, mud cleaner, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 set of Construction Mud Solids Liquid Separation Equipment has been manufactured and are ready to start serving for a project in Australia.

This set of Construction Mud Solids Liquid Separation Equipment includes:

1. Linear dewatering vibrating screen GNLMZ1236

2. Double deck Vibrating Screen GNZS706

3. mud cleaner GNZJ703

4. Decanter centrifuge GNLW553

5. Chemical Dosing Unit

To make sure this set of Construction Mud Solids Liquid Separation Equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like Chemical Dosing Unit, Double deck Vibrating Screen, mud cleaner, Chemical Dosing Unit, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 set of Drilling mud cleaner  have been manufactured and are ready to start serving for a Drilling Company in China.

To make sure the Drilling mud cleaner will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Drilling mud cleaner, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Drilling Fluids shale shakers and Mud tanks have been manufactured and are ready to start serving for an Offshore Drilling Company.

Shale shaker is one of the most important drilling fluids treatment equipment, 6 sets of shakers are provided in this system.GN Solids Control also manufactures API 3rd party verified shaker screens, more cost-effective than most of other brands.

GN Solids Control has built thousands of mud tanks for our worldwide clients. At the same time, walkway, ladder and safety guide rails can also be equipped along with the mud tanks.

If you need any support about the operation and maintenance of  shale shakers and Mud tanks, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Slurry Separation Desander Plant have been manufactured and are ready to start serving for an Asia Client’s project. The equipment includes:

4 sets of GNMS-1000D pipe jacking Slurry separation system

1 set of GNTBM-240 three-stage purification Slurry separation system

Including Vibrating Screen, Desilter, Desander Unit and 2 slurry pumps

3 sets of GNMS-1500D pipe jacking Slurry separation systems, each set is configured as follows:

Desanding cyclone 4 inches: 2 sets   

1 set of  double-decker vibrating screen

1 set of  Sand pump: 75KW

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

To make sure the Slurry Separation Desander Plant will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s Slurry Dewatering equipment like Vibrating Screen, Desilter, Desander Unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, a set of dewatering screw press and Chemical Dosing Unit have been manufactured and are ready to start serving for an Sewage Treatment project in the USA, including one set of screw press GNDL-402 and two sets of 500L Chemical Dosing Units.

To make sure these sets of dewatering screw press and Chemical Dosing Unit will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

If you need any support about the operation and maintenance of GN’s equipment like dewatering screw press and Chemical Dosing Unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, a complete set of Sludge dewatering Screw press and Chemical Dosing Unit have been manufactured and are ready to start serving for an American Client.

To make sure this set of Sludge dewatering Screw press and Chemical Dosing Unit will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

If you need any support about the operation and maintenance of GN’s equipment like Sludge dewatering Screw press and Chemical Dosing Unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, a series of Solids Control equipment have been manufactured and are ready to start serving for an International Drilling Fluids Service Company, the system includes the following modules：

1. Decanter centrifuge GNLW363CG: 4 units

2. Cuttings Dryer GNCD930G: 1 unit

3. Screw Conveyor  6 units

4. Screw Pump: 4 units

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

To make sure these equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like Decanter centrifuge, Screw Conveyor, Screw Pump and Cuttings Dryer, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of 35000bbl Liquid Mud Plant have been manufactured and are ready to start serving for an International Drilling Fluids Service Company, the system includes the following modules：

1. Mud solids control system module: 1 set of drilling fluid vibrating screen GNZS594F, 1 set of medium speed Decanter centrifuge GNLW452D, 1 set of high speed Decanter centrifugeGNLW363C

2. Mixing tank module: 4 mixing sand pumps, 4 mixing hoppers

3. Vertical mud storage tank module: 70 500BBL (80m³) mud tanks.

To make sure this set of dewatering system will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like High-G Shaker and Cuttings Dryer, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of Drilling Rig Solids Control Equipment have been manufactured and are ready to start serving for a Oilfield Service Company, the system includes 4 sets of vibrating screen GNZS594F, 1 set of mud cleaner GNZJ594F-3S16N, 2 sets of Decanter centrifuge GNLW454ET-VFD.

To make sure this set of Drilling Rig Solids Control Equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like vibrating scree, mud cleaner, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump