News for GN’s customers: GN Solids America successfully participated 2023 Offshore Technology Conference (OTC) in Houston

The basic information of the 2023 Offshore Technology Conference (OTC 2023) is as follows:

Exhibition Name: Offshore Technology Conference 2023

Exhibition location: NRG Park, Houston, TX, USA

Official website address: https://2023.otcnet.org/

The main products that exhibited by GN:

1. The second generation of Negative pressure vibrating screen

2. Drilling fluid Decanter centrifuge

3. Drilling fluid Vibrating Screen

4. Mobile solids vacuum pump

To make sure this series of exhibits will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

The Offshore Technology Conference (OTC) is where energy professionals meet to exchange ideas and opinions to advance scientific and technical knowledge for offshore resources and environmental matters.

Celebrating 50 years since 1969, OTC’s flagship conference is held annually at NRG Park (formerly Reliant Park) in Houston. OTC has expanded technically and globally with OTC Brasil and OTC Asia.

OTC is sponsored by 13 industry organizations and societies, who work cooperatively to develop the technical program. OTC also has endorsing and supporting organizations.

If you need any support about the operation and maintenance of Negative pressure vibrating screen, large-spinning decanter centrifuge, oily sludge treatment system, solid vacuum pump, Drilling cuttings dryer, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry.

If you are interested in GN products, please check the following products of GN company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of Triple Shale Shaker have been manufactured and ready to start serving a new project for an Drilling Company in China.

Product features:

1. Triple Shale Shaker, three negative pressure vibrating screens are on a warped seat to meet the requirements of rapid installation and handling.

2. The negative pressure Shale Shaker can be configured with one dragging one or one dragging three.

3. The Shale Shaker model is GNZS595J, splash-proof vibrating screen.

To make sure the Triple Shale Shakers will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for the Triple Shale Shakers in each step.

If you need any support about the operation and maintenance of the triple Shale Shaker, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News for GN’s customers: GN Solids Control would like to Invite you to join the 2023 CIPPE Bejing Oil Equipment Exhibition.

Exhibition Name: The 23rd China International Petroleum and Petrochemical Technology and Equipment Exhibition (CIPPE)

Exhibition time: 2023.5.31-6.2

Exhibition venue: Beijing China International Exhibition Center (new hall)

GN Booth No.: E2168

Main exhibits:

1. Negative pressure vibrating screen
2. 

2. Decanter centrifuge

3. Drilling cuttings dryer

4. solid vacuum pump

5. Screw conveyor

6. Vibrating screen, etc.

The 23rd China International Petroleum and Petrochemical Technology and Equipment Exhibition-China International Petroleum and Petrochemical Technology and Equipment Exhibition (CIPPE for short) is a regular meeting of the international petroleum and petrochemical industry. CIPPE has attracted 1,800 exhibitors from 65 countries and regions around the world, 46 of the world’s top 500 companies, 18 international pavilions, 120,000 professional visitors, and an exhibition area of 90,000 square meters. It has become the annual World Petroleum Equipment Conference.

If you need any support about the operation and maintenance of Negative pressure vibrating screen, large-spinning decanter centrifuge, oily sludge treatment system, solid vacuum pump, Drilling cuttings dryer, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry.

The cippe2022 had a visit group to the headquarters of PetroChina, Sinopec, and CNOOC, PetroChina Materials Corporation, PetroChina Exploration and Development Overseas Project Department, China Petroleum Pipeline Bureau, Sinopec Petroleum Engineering Materials and Equipment Department, CNOOC Service Procurement Center, Sinotrans & Changhang Group, COSCO Shipping, National Energy LNG Technology R&D Center, Hilong Oil Service, Wison Engineering, Iraqi Ministry of Petroleum Delegation, Mongolian Minerals and Petroleum Administration, Saudi Aramco, Abu Dhabi National Oil Company, Abu Dhabi National Energy Company, Abu Dhabi National Petroleum Construction Company, Estonian National Energy Company, Gazprom, Gazprom, Russian Pipeline, Petronas, Kazakhstan National Gas Transportation Company, Azerbaijan National Petroleum, Japanese Drilling Company, Shell, Total, ConocoPhillips, Fluor Engineering, Hyundai Heavy Industries, Hundreds of professional procurement groups at home and abroad, such as Technib FMC and British Petroleum Engineering Company, visited and negotiated on-site. The “International Petroleum and Natural Gas Industry Summit Forum” was held during the exhibition, which won praise from industry organizations and relevant government agencies. The exhibition includes Xinhua News Agency, People’s Daily, CCTV, China Daily, PetroChina, Sinopec, Upstream, Worldoils, Oil and Gas Australia, TB Petroleum, China Securities News, Shanghai Securities News, China Business News, Wall Street Journal, Xinhuanet, Thousands of domestic and foreign media including Sina, Sohu, and People’s Daily reported.

If you are interested in GN products, please check the following products of GN company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of Screw press sludge dewatering machine GNDL402 and Chemical dosing unit GNSJY500 have been manufactured and ready to start serving a new Sewage Treatment project for an Overseas Customer.

To make sure the Screw press sludge dewatering machine and Chemical dosing unit will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of Screw press sludge dewatering machine and Chemical dosing unit in each step.

If you need any support about the operation and maintenance of the equipment of Screw press sludge dewatering machine and Chemical dosing unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 3 complete sets of Drilling Rig Solids Control Equipment have been manufactured and are ready to start serving for a South America Customer, the system includes:

Drilling fluid shale shaker: 12 sets, GNZS594J

Mud cleaner: 6 sets of model GNZJ594J-3S16N

Medium-speed Decanter centrifuge: 3 sets of model GNLW363D

High-speed Decanter centrifuge: 3 sets of model GNLW363D

Feeding Screw Pump for decanter centrifuge: 3 sets of model GNG30-075C

To make sure these sets of Drilling Rig Solids Control Equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like shale shaker, mud cleaner, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 series of Mining vibrating screen  and Decanter centrifuge, have been manufactured and ready to start serving for an Australian Construction Mud Treatment project. Including:

1. Liner dewatering vibrating screen

2. High-frequency liner vibrating screen

3. Mud cleaner

4. Decanter centrifuge

To make sure this series of mining vibrating screen and Decanter centrifuge will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Construction Mud Solids Liquid Separation Equipment, like mining vibrating screen including Medium-sized linear dewatering screen and high-frequency liner screen, and Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in Decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 2 complete sets of Screw press sludge dewatering machine GNDL-303 have been manufactured and ready to start serving a new Wastewater Treatment project for an America Textile Mill.

To make sure the 2 sets of Screw press sludge dewatering machines will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of Screw press sludge dewatering machine and Chemical dosing unit in each step.

If you need any support about the operation and maintenance of the equipment of Screw press sludge dewatering machine and Chemical dosing unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of Dual Motion Shale Shaker and mud cleaner with Spill proof cover have been manufactured and ready to start serving a new project for a China Drilling Company.

To make sure the Dual Motion Shale Shaker and mud cleaner will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for the Shale Shaker and mud cleaner in each step.

If you need any support about the operation and maintenance of the Dual Motion Shale Shaker and mud cleaner, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

GN high-end CNC lathes, CNC centers, and CNC gantry milling machines can better ensure the machining accuracy of centrifuge parts. In terms of the dynamic balance of the decanter centrifuge, in addition to the ordinary low and medium speed dynamic balance, GN also applies a high speed dynamic balance process, which can dynamically balance the centrifuge screw and bowl at the actual working speed of the centrifuge. In terms of market applications, GN decanter centrifuges are widely used in the industry, and the products are exported to more than 60 countries and regions in the world, and have won high praise from customers.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, a set of Sludge dewatering screw press have been manufactured and ready to start serving for aTextile Plant Wastewater Treatment in Southeast Asia.

To make sure this set of sludge dewatering screw press will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

If you need any support about the operation and maintenance of GN’s equipment like dewatering screw press and Chemical Dosing Unit, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

News from GN company this week: Recently, 1 complete set of 1500HP Drilling Rig Solids Control Equipment have been manufactured and are ready to start serving for an  African project, the system includes:

Drilling fluid shale shaker: 3 sets of GNZS594F-SHBF

Mud cleaner: 1 set of GNZJ594F-3S16N

Solids control Decanter centrifuge: 2 sets of GNLW363D

Mixing funnel, etc.

To make sure this set of Drilling Rig Solids Control Equipment will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like shale shaker, mud cleaner, Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

GN Solids Control is one of the most famous International Brand for Mud Solids Control System & Drilling Waste Management. GN have the one stop for Solids Control Solution for mud recycling projects.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump