News from GN company this week: Recently, 1 set of Decanter centrifuge have been manufactured and are ready to start serving for an drilling mud treatment project.

Decanter centrifuges used for drilling mud separation are generally divided into 3 types:

Medium speed centrifuge for high Gravity solid phase (HGS–High Gravity Solids), high speed centrifuge for low Gravity solid phase (LGS).

The VFD centrifuge can meet the above two situations, and can also be used for drilling mud treatment.

To make sure this set of Decanter centrifuge will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

The main functions of complete equipment Decanter centrifuge sludge dewatering system are as follows:

 (1) The control system has two operating conditions: manual control and automatic control: in the manual control state, various system parameters can be adjusted and set during operation; in the automatic control state, the system parameter settings are adjusted The flow rate and dosing amount of the feed pump are controlled by the concentration meter in the sludge tank. The dosing amount and dilution water amount are controlled fuzzyly according to the turbidity of the separation liquid of the centrifuge. The control system is an intelligent automatic control process ;

(2) With automatic and continuous measurement of the Decanter centrifuge rotating speed and differential speed of the centrifuge;

(3) It has status monitoring, fault alarm, data display and print report of various operating parameters of the system;

(4) Automatically save mud volume through concentration detection, so that the centrifuge is always in the best working state;

(5) It has system working status, alarm signal, various operating parameters and historical records transmitted to the host computer;

(6) Monitoring and display of parameters such as current, voltage, flow rate, host speed, differential speed, pushing torque, running cumulative time, temperature, etc .;

(7) With dynamic screen display and parameter setting of each operation unit;

(8) Through the network configuration software of the host computer, remote fault diagnosis function can be realized; animation display of operating status; real-time data report; historical data search;

(9) The entire control system is fully automatic controlled by PLC + LCD touch screen, so that the system is in intelligent full-automatic operation in operation, which is an ideal turnkey project.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

News from GN company this week: Recently, 2 sets of Fifth Generation Decanter centrifuges has been manufactured and are ready to start serving for an Overseas Wastewater treatment project.

Model: GNLW454ET-VFD, 2sets.

The relevant situations are as follows:

Equipment technical requirements:

1. Material information: Municipal sewage treatment, solid content 2-3%.
2. Treatment capacity 30-40 cubic meters per hour

3. Main motor: 45kw, Back motor: 15kw

4.Material: Bowl SS2205, Screw SS2205

Collection Box SS304, Base: Carbon Steel

5. Wear protection:

Carbide sleeve protection for material distribution port of screw pusher Carbide sleeve protection for slag discharge port

Spiral blade carbide sheet protection

6. Sensors: including 2 temperature sensors and 1 vibration sensor

7. Slag discharge device: a closed rectangular tube slag discharge groove connecting the slag discharge port of the centrifuge collection box and the inlet of the screw conveyor, the size of the inlet and outlet is the same, and its height is 500mm

To make sure the Decanter centrifuges will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of GN’s equipment like Decanter centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

Since the belt  filter machine was the mainstream of sludge dewatering in sewage treatment plants in the past, the advantages of the centrifuge are shown in the treatment effect and comparison with the belt  filter machine. The Decanter centrifuge has the following advantages for the belt  filter machine:

①The Decanter centrifuge uses the principle of centrifugal sedimentation to separate the solid and liquid. Because the filter has a filter screen, it will not cause clogging. The belt machine uses the belt filter machine to separate the solid and liquid.

②The Decanter centrifuge is suitable for the concentration and dewatering of various types of sludge, and the belt filter machine is also suitable for various types of sludge, but the remaining activated sludge needs a large amount of medicine and the dehydration is difficult;

③When the feed concentration changes during the dehydration process of the Decanter centrifuge , the slip and torque of the drum and the screw will be automatically tracked and adjusted, so there is no need for a special person to operate, and when the feed concentration changes during the dehydration process, the belt filter machine speed, belt tension, dosing amount and flushing water pressure all need to be adjusted, and the operation requirements are high;

④In the Decanter centrifuge, fine sludge can also be separated from water, so the dosage of flocculant is small. Generally, the dosage of mixed sludge during dewatering is: 1.2kg / t [dry sludge], sludge recovery The rate is above 95%, the moisture content of the mud cake after dehydration is about 65% -75%, and the belt filter machine cannot be woven too densely because of the filter belt. In order to prevent the small sludge from leaking, more flocculant needs to be added In order to make the sludge form larger flocs, the dosage of mixed sludge during dehydration is generally greater than 3kg / L [dry sludge], the sludge recovery rate is about 90%, and the moisture content of the sludge cake after dehydration is about 80%;

⑤The power consumption per cubic meter of sludge dewatering of the centrifuge is 1.2kw / m3, the noise during operation is 76-80db, 24 hours a day continuous operation except the shutdown, no washing water is needed during operation; The power consumption is 0.8kw / m3, the noise during operation is 70-75db, the filter cloth needs to be relaxed and maintained. Generally only two shifts are arranged every day, and the filter cloth needs to be continuously washed with high-pressure water during operation;

⑥The Decanter centrifuge takes up little space, the installation and commissioning are simple, the supporting equipment is only the dosing and feeding and discharging conveyors, the whole machine is fully sealed, and the workshop environment is good; while the belt machine covers a large area, the supporting equipment is not only dosing and feeding and discharging Outside the machine, a flushing pump, air compressor, sludge conditioner, etc. are needed. The whole machine has poor sealing performance. High-pressure cleaning water mist and odor pollute the environment. If the management is not good, it will cause mud overflow;

⑦ The wearing parts of centrifuges are bearings and seals, and the maintenance cycle of the discharge screw is generally more than 3a; while the wearing parts of the machine, in addition to bearings and seals, the belt filter machine also needs to be replaced, which is expensive

News from GN company this week: Recently, 1 set of Decanter Centrifuge and 1 set of 3–Phase Disc stack centrifuge have been manufactured and are ready to start serving for a Kazakstan Client.

To make sure the Decanter Centrifuge and 3–Phase Disc stack centrifuge will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Decanter Centrifuge and 3–Phase Disc stack centrifuge, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Oil water separator

Centrifugal pump

Vacuum Pump

Submersible pump

The mechanical dewatering of sludge is an important condition for further disposal. If incineration or other heat treatment is used as the ultimate disposal method, the dewatering power of the Decanter centrifuge is required to be as high as possible, because mechanical dewatering requires 1-2kwh of energy (electric energy) for each ton of water sludge disposal, and not only electric energy, and A lot of heat energy is needed for the evaporation of water.

In most cases, the increase in the rate of mechanical dehydration and dehydration is critical to the reduction of the subsequent disposal and disposal costs of sludge. The principle of separating sodium sulfate in the crystallization process is that the solubility of sodium sulfate in sodium thiocyanate solution is very low, and crystals are easy to form, so the concentrated sodium thiocyanate solution is settled through the settling tank to make sodium sulfate Grain gradually grows at the bottom of the settling tank (sodium sulfate content is about 13% to 15%).

 The role of the  Decanter centrifuge  is to separate the sodium sulfate crystals in the bottom solution (only a small part of them are beaten to evaporate the five effects as seed crystals). The resin is replaced and adsorbs sodium thiocyanate in between, and the waste liquid is discharged. If the separation effect of the centrifuge is not good, the content of sodium thiocyanate in the solid phase separator is too high, which exceeds the adsorption capacity of the sewage resin, and environmental protection requires that the content of sodium thiocyanate in the discharged sewage should not exceed 200ppm, the workshop has to Sodium thiocyanate with concentrated sodium sulfate is poured into the system and concentrated from the beginning to recover. The sodium sulfate content will accumulate in the system, which will eventually lead to unsteady production of the two systems of evaporation and crystallization, and then affect the normal production operation of the equipment.

Nearly 90% of sodium sulfate is separated from sodium thiocyanate in the crystallization separation step. The balance of sodium sulfate must be completed by the separation effect of the centrifuge, so in all recovery equipment, the  Decanter centrifuge  plays a crucial role. The important role is to clean impurities and ensure the clean circulation of blood, just like a human kidney. The separation function of the centrifuge directly affects the smooth production and long-term operation of the entire workshop and even the whole plant.