There are some important safety precautions when using a Decanter centrifuge. We hope our clients and end users can read and implement carefully.

1. The decanter centrifuge must not be used to separate flammable, toxic, corrosive and radioactive materials.

2. Before preparing to install or operate a decanter centrifuge, please read and follow all requirements in the manual carefully.

3. Do not operate centrifuges with warning signs that are damaged or without warning signs.

4. If the vibration amplitude of the machine exceeds 24mm/sec, please stop immediately!

5. When the feed temperature exceeds the limits specified in the data list of the three manuals for installation, operation and maintenance, centrifuges are not allowed.

6. When there is ice water, freezing or hard material in the drum, the centrifuge cannot be started.

7. Do not operate the centrifuge at a speed exceeding the maximum speed of the drum and the maximum density of solids as specified in the data list of the manual or as indicated on the nameplate of the centrifuge.

8. Do not operate the centrifuge without the belt guard and other protection facilities.

9. Regularly check all automatic shut-off devices and monitoring systems to ensure their normal operation.

10. If you are not sure whether the centrifuge is completely stopped, whether the main power supply is completely disconnected, and whether the main switch is disconnected and safely locked, please do not disassemble the centrifuge. 11. Do not operate the centrifuge when there are cracks, dents, voids or grooves in the drum, motor or support frame of the centrifuge.

12. When the running direction of the motor is opposite to the direction of the indicated arrow, please do not perform any operation on the centrifuge.

13. When the centrifuge is not completely installed, the machine must not be started.

14. Follow all lubrication procedures and steps of the equipment.

15. At least annually check the base of the centrifuge and motor and all supporting frames, casing and connecting pipes.

16. Do not place rags or loose clothing near rotating parts.

17. When disassembling, installing or operating, operating and servicing the machine, please strictly follow the normal steps.

18. Only specially trained technicians can operate, clean, disassemble and install decanter centrifuges.

News for GN’s customers: GN Separation would like to Invite you to join the China Coal & Mining Expo 2023 during 25-28 Oct 2023.

Organized by China Coal Industry Association, China Coal Energy Group Co., Ltd., China Coal Industry International Technical Consulting Co., Ltd. Huiming Exhibition Co., Ltd. hosted the 20th China International Coal Mining Technology Exchange and Equipment Exhibition (China Coal & Mining Expo 2023) will be held at the China International Exhibition Center (New Pavilion) in Beijing on October 25-28, 2023. The theme of the exhibition is “Smart leads the future, green shared development.” The exhibition focuses on new equipment, new technology and new products in China’s coal industry. The exhibition is expected to be more than 130,000 square meters in size, exhibitors close to 1,000, professional audience is expected to again surpass 120,000 visitors.

Our booth number is :E4106

Our exhibition equipment:

Stack vibrating screen, liner motion dewatering vibrating screen, Decanter centrifuge, Vacuum Pump

 

Hebei GN Separation Equipment Co., Ltd (GN Separation) is a wholly-owned subsidiary of GN Solid Control. The Mine Business Department of GN Separation is specially responsible for the development and manufacture of mining vibration screen equipment.

In addition to fine vibrating screen and medium vibrating screen, GN Separation has also developed large double-layer vibrating screen products. Including the following series:

1. Large double-layer linear vibrating screen

2. Large double-layer banana vibrating screen

3. Large double-layer flip flop vibrating scree

To make sure this series of mining vibrating screen will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.