Monthly Archives: February 2022

1500GPM Drilling Mud Cleaner for Drilling Company in China

News from GN company this week: Recently, 1 set of Drilling mud cleaner have been manufactured and are ready to start serving for a Drilling Company in China.

To make sure the Drilling mud cleaner will provide a reliable performance and the parts and components of all the equipment will run smoothly for a long term operation, our technical department, production department and quality control department have paid a lot of attention to the material selection, material preparation, every step of production and the inspection for this set of equipment in each step.

If you need any support about the operation and maintenance of Drilling mud cleaner, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

As a leading manufacturer of separation equipment and conveying equipment, GN always pay high attention to the product quality and consider the long-term benefits for our users. We would also like to introduce GN as a professional manufacturer in decanter centrifuge field, GN pays a lot of attention in the selection of raw materials, high-quality centrifugal casting or forging stainless steel materials are used, and for wearing parts, hard alloy protection is used.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

Drilling Fluids Shale Shaker and Mud tank for Offshore Drilling Company

News from GN company this week: Recently, 1 series of Drilling Fluids shale shakers and Mud tanks have been manufactured and are ready to start serving for an Offshore Drilling Company.

Shale shaker is one of the most important drilling fluids treatment equipment, 6 sets of shakers are provided in this system.GN Solids Control also manufactures API 3rd party verified shaker screens, more cost-effective than most of other brands.

GN Solids Control has built thousands of mud tanks for our worldwide clients. At the same time, walkway, ladder and safety guide rails can also be equipped along with the mud tanks.

If you need any support about the operation and maintenance of shale shakers and Mud tanks, please feel free to contact GN company for our engineers’ best experience and knowledge in the relevant industry. We will do our best to assist your project because just in this way we can establish a stable and long term cooperation. And we can provide on-line support and site instruction for specific situation if needed.

By the way, if you are interested in our products, please check the following items of our company on Alibaba:

Decanter centrifuge

3–Phase Disc centrifuge

Sludge dewatering Screw press

The methods for removal blocking material from decanter centrifuge

The decanter centrifuge operators often encounters problems like material blocking material during their daily use. Here are some normal solutions about the blocking issue to share with our users:

When the decanter centrifuge cannot be turned on normally and the auxiliary inverter alarms overload, we can remove the protective cover of the auxiliary motor and move the input shaft pulley of the differential with the hand wheel. The phenomenon proved to be that too much material between the spiral and the drum caused the spiral to jam. The solution is as follows:

1. Catch the differential pulley with something, and manually rotate the steering wheel to rotate the drum, until the resistance obviously disappears. Then adjust the main and auxiliary machines to a lower frequency, start at low speed, and rinse with water.

2. Some decanter centrifuges are equipped with foreign frequency converters, such as ABB, Siemens, etc. Some frequency converters have a special low-speed protection starting method.

If the low-speed and high-torque starting function can be realized, just adjust the main and auxiliary machines to the low-speed section and rinse with water.

Another method is to hold the drum in place, remove the end water blocking adjustment plate of the drum, adjust the auxiliary machine to reverse, turn on, and let the material be discharged from the drain outlet of the drum. Then adjust the auxiliary machine to forward rotation and discharge. Repeat the operation. This method is suitable for large length-diameter ratio decanter centrifuges where the material blocking is particularly serious and the artificial rotation cannot move at all.

GN can not only provide users with Dewatering Decanter Centrifuges, rely on GN rich production line of separation and conveying equipment. GN can also provide users with turnkey solutions for the material dewatering process, including solutions for material transportation, classification and dewatering.